M2Tech HiFace USB to S/PDIF Converter

USB to S/PDIF

A 24bit/192kHz USB to S/PDIF Converter for both Macintosh and Windows based computers, in a small convenient size.

Extremely Low Jitter

Clean digital data stream by utilising very low jitter oscillators and proprietary drivers for Macintosh and Windows.

The M2Tech hiFace USB interface has been conceived to obtain the highest quality digital audio signal from a PC or MAC. The hiFace input format is a data stream signal with sampling frequency/resolution up to 192kHz/24bits, available from any PC or MAC USB port.

A very high quality S/PDIF stereo digital audio output signal is available from hiFace for your Hi-Fi system DAC (Digital to Analog Converter). HiFace looks like a small USB pendrive, featuring a very compact size. Internal very low jitter oscillators and proprietary drivers allow for playing 192kHz/24bits audio files that feature the best signal quality.

  • Highest quality digital audio up to 192kHz/24bit
  • S/PDIF audio format available from your PC or MAC
  • Very low jitter oscillators and proprietary drivers
  • Compact size (2x2.2x10.2cm) with hi-end performances
     

Perfect for use with an existing DAC that lacks a USB port, or has a USB port capable of only 16bit/44.1kHz data rates. By adding the M2Tech hiFace you can upgrade your DAC to compete with more modern DACs.

Please Note: The hiFace is NOT suitable for use with video playback as there is some latency in the driver which will cause sync issues between the audio and video..

LOW JITTER, LOW PHASE NOISE, HIGH STABILITY OSCILLATORS
Most audio interfaces and USB-provided DACs refer the data stream clock to the same USB interface clock, that often suffers a very heavy jitter (short range oscillator frequency variations). Thanks to two quartz precision oscillators used on M2Tech hiFace, clock source for output data stream features a very low jitter. A more stable clock is recovered by DAC S/PDIF receiver; a low jitter produces a very limited sound image distortion and degradation. Phase noise (main responsible for jitter) is also very low: this guarantees a short and long range clock stability, also reinforced by a board supply voltage regulation (e.g. at environmental temperature stability is 2-5ppm approximately, compared to 50-100ppm performed by oscillators normally used on commercial CD players). 

PROPRIETARY DRIVERS
The standard audio drivers available on the market (e.g. Microsoft Windows operating system) dictated constraints can be overcome thanks to hiFace proprietary drivers: they allow for transferring audio data, maintaining the original file quality without any loss of resolution quality; also, sampling frequency constraints are overcome, while Microsoft and ASIO drivers oblige to operate at no more than 96kHz. When hiFace is used together with a player application such as FooBar (available for free on Internet), you can transfer S/PDIF stream music files to a D/A converter at 192kHz/24bits maximum frequency/resolution, avoiding undesired PC or MAC audio mixer data processing during the data transfer from hard disk to interface. Presently, Windows XP, Vista and 7 Windows drivers are available. Soon available also Mac and Linux drivers. 

COMPACT SIZE AND EASE OF USE

M2Tech hiFace features a very compact size and can be directly (or using an accessory USB A-A adapter, not supplied with hiFace) connected to a High Speed USB 2.0 port of any computer. A very high electric and mechanical performance RCA gold connector provides an output signal, ready to be connected to a Hi-End system.

No external power supply is required, as hiFace draws its power from USB bus itself and regulates it with its internal regulators. hiFace USB interface connected to a last generation mini PC provided with a High Speed USB port makes for a complete music transport system at very low prices (in the range of few hundreds Euros).

Such system allows for listening any density and resolution music files, playing own CD’s using a CD ROM drive, obtaining access to more than 10,000 web radio, many of which broadcast their transmissions with CD quality.

  • Connections: Input: 1 x USB A type male, Output: 1 x RCA female
  • I/O Standard: Input: USB 2.0 Format, Output: S/PDIF Stereo Digital Audio Format
  • Sampling Frequency: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz 
  • Resolution: 16 up to 24 bit

  • Dimensions: 10.2(d) x 2.2(h) x 2(w) cm
  • Power Supply: 5V DC from USB bus
  • Temperature: from 0°C to 70°C
  • Weight: 50gr approx.

 

The M2Tech HiFace

The M2Tech Hiface is the most cost effective way to improve the performance of older DACs with limited data rates across their USB inputs, or to add USB to those without a USB port.

Latest HiFace Reviews

Enjoy The Music HiFace Review

I purchased three of the hiFace devices for my personal use...The curious reader might ask, why three of them? Easy, one for my dedicated system, one for work and one to hack, but that's another story...
Read Full Review

Computer Audiophile HiFace Review

There's no denying the hiFace has a lot going for it with its async USB transfer mode, support of all sample rates, and very inexpensive price tag. If it wasn't for the music and the fact that I want to listen to said music at the highest quality possible the M2Tech hiFace would certainly make the Olympic podium (gold, silver, or bronze).
Read Full Review